Tibbo
Three direct I/O lines and ground
- SKU:
- TIB-00-2
- MPN:
- #00-2
- Availability:
- Usually ships within 24 hours
Description
Form: M1S
Power: 5V - Consumes 20mA
Mates with: #19, #20, #21
Details
As with Tibbit #00-1, this device allows you to work with CPU lines directly. The only difference is that one of the lines is replaced by the ground (GND) line.
The GND line may be necessary when using this Tibbit with "C" device #21 (four terminal blocks). #21 doesn't have its own dedicated ground, so if the ground is necessary (and it usually is) then it must come from the neighboring "M" device, such as this Tibbit.
Note that a CPU I/O line has the voltage swing from 0-3.3V when the line is enabled (io.enabled= 1- YES). The voltage may be close to 5V when the line is disabled (io.enabled= 0- NO). This is because the CPU has weak pull-up resistors connected to 5V.
LEDs
Three yellow LEDs are connected to three control lines of the CPU (through buffering gates). LEDs light up for the LOW state of control lines.
Related Products
Four direct I/O lines
Tibbo
Two direct I/O lines, +5V power, ground
Tibbo
Three PWMs with power outputs.
Tibbo
Three isolated inputs, common (+)
Tibbo
Three isolated inputs, common (-)
Tibbo