Tibbo
Two isolated inputs
In Stock
- SKU:
- TIB-04-1
- MPN:
- #04-1
- Availability:
- Usually ships within 24 hours
Frequently bought together:
Description
Form: M1S
Power: 5V - Consumes 30mA
Mates with: #19, #20, #21
Details
If no external resistor is added these inputs activate at about 2V. Forward current should not exceed 10mA, and this caps the maximum input voltage at around 5V. Add external resistors if you need to apply higher input voltage.
Combine this Tibbit with terminal block devices – #20 (nine terminal blocks) or #21 (four terminal blocks).
LEDs
There are two green LEDs which are connected to two control lines. LEDs light up for the LOW state of control lines (i.e. when current passes through the diodes of the opto-couples).
Related Products
Two 24V isolated inputs
Tibbo
Form: M1S Power: 5V - Consumes 30mA Mates with: #19, #20, #21 Details This Tibbit is optimized for the nominal input voltage of 24V. If no external resistor is added these inputs activate at about...
TIB-04-5
Three isolated inputs, common (+)
Tibbo
Form: M1S Power: 5V - Consumes 35mA Mates with: #19, #20, #21 Details If no external resistor is added these inputs activate at about 2V. Forward current should not exceed 10mA, and this caps the...
TIB-04-3
Three isolated inputs, common (-)
Tibbo
Form: M1S Power: 5V - Consumes 35mA Mates with: #19, #20, #21 Details If no external resistor is added these inputs activate at about 2V. Forward current should not exceed 10mA, and this caps the...
TIB-04-2
Three 24V isolated inputs, common (+)
Tibbo
Form: M1S Power: 5V - Consumes 35mA Mates with: #19, #20, #21 Details This Tibbit is optimized for the nominal input voltage of 24V. If no external resistor is added these inputs activate at about...
TIB-04-7
Three 24V isolated inputs, common (-)
Tibbo
Form: M1S Power: 5V - Consumes 35mA Mates with: #19, #20, #21 Details This Tibbit is optimized for the nominal input voltage of 24V. If no external resistor is added these inputs activate at about...
TIB-04-6
Four 24V isolated inputs, common ground
Tibbo
Form: M1S Power: 5V - Consumes 40mA Mates with: #19, #20, #21 Details This Tibbit is optimized for the nominal input voltage of 24V. If no external resistor is added these inputs activate at about...
TIB-04-8
Two 24V NPN isolated open collector outputs
Tibbo
Form: M1S Power: 5V - Consumes 20mA Mates with: #19, #20, #21 Details Output transistors are rated for 24V/0.5A. To activate a transistor, set the corresponding control line LOW. When left...
TIB-58
Two 24V PNP isolated open collector outputs
Tibbo
Form: M1S Power: 5V - Consumes 20mA Mates with: #19, #20, #21 Details Output transistors are rated for 24V/0.5A. To activate a transistor, set the corresponding control line LOW. When left...
TIB-59
Four dry contact inputs
Tibbo
Form: M1S Power: 5V - Consumes 40mA Mates with: #19, #20, #21 Details Unlike Tibbit #04, this device requires no external power to control its inputs: Shorting an input to the system ground will...
TIB-54