Tibbo
Two solid state relays
In Stock
- SKU:
- TIB-07
- MPN:
- #07
- Availability:
- Usually ships within 24 hours
Frequently bought together:
Description
Form: M1S
Power: 5V - Consumes 25mA
Mates with: #19, #20, #21
Details
These relays are rated for the maximum load of 1A per relay.
To activate a relay, set the corresponding control line LOW. When left unconnected, control lines default to HIGH (and, hence, relays are off).
Combine this Tibbit with terminal block devices — #20 (nine terminal blocks) or #21 (four terminal blocks).
LEDs
There are two red LEDs which are connected to two SSR control lines. LEDs light up for the LOW state of control lines (i.e. when relays are activated).
Related Products
High-voltage AC solid state relay
Tibbo
Form: H1 Power: 5V - Consumes 20mA Details This Tibbit is based on the CPC1965 AC solid state relay and is implemented as the H1 hybrid device. The CPC1965 is capable of handling AC voltages of up to...
TIB-15
Two high-power relays
Tibbo
Form: M2T Power: 5V - Consumes 140mA Mates with: #19, #20, #21 Details These relays have the contact capacity rated at 16A/48V (resistive load). To activate a relay, set the corresponding control...
TIB-06
Two low-power relays (configuration 1)
Tibbo
Form: M1S Power: 5V - Consumes 60mA Mates with: #19, #20, #21 Details These relays are rated for 1A/30V. To activate a relay, set the corresponding control line LOW. When left unconnected, control...
TIB-03-1
Two low-power relays (configuration 2)
Tibbo
Form: M1S Power: 5V - Consumes 60mA Mates with: #19, #20, #21 Details These relays are rated for 1A/30V. To activate a relay, set the corresponding control line LOW. When left unconnected, control...
TIB-03-2
Two 24V isolated inputs
Tibbo
Form: M1S Power: 5V - Consumes 30mA Mates with: #19, #20, #21 Details This Tibbit is optimized for the nominal input voltage of 24V. If no external resistor is added these inputs activate at about...
TIB-04-5