Fermvision-CCTV
Power Ethernet Over Coax, 1 Output Module (SLAVE)
In Stock
(No reviews yet)
Write a Review
- SKU:
- TNP-PEOC-SLAVE
- MPN:
- FVN-PEOC-MASTER
- Availability:
- Usually ships within 24 hours
Frequently bought together:
Description
- Works over coaxial cable, twisted pair cable, telephone line and other 2-wire cables
- Transmit RJ45 Ethernet data and/or POE signal
- Maximum 1Km for Data only signal
- Maximum 300m for PoE signal
- Supports 4 x 8MP or lower IP Cameras
- Data transmission bandwidth: 100Mbps
- Automatic networking
- No need of shutdown maintenance during use, electrified hot plug-in and pull-out
- Industrial design and modular design make the equipment reliable and flexible
Downloads
Related Products
Three PWMs with power outputs.
Tibbo
Form: M1S Power: 5V - Consumes 20mA Mates with: #19, #20, #21 Details This Tibbit is based on the PIC16F1824 microcontroller and takes advantage of the PWM channels available on this PIC device. The...
TIB-17
Four open collector outputs
Tibbo
Form: M1S Power: 5V - Consumes 50mA Mates with: #19, #20, #21 Details Transistors are rated for the maximum voltage of 24V and the maximum per-channel current of 0.5A. Note that the maximum current...
TIB-11
Two low-power relays (configuration 1)
Tibbo
Form: M1S Power: 5V - Consumes 60mA Mates with: #19, #20, #21 Details These relays are rated for 1A/30V. To activate a relay, set the corresponding control line LOW. When left unconnected, control...
TIB-03-1
Three PWMs with open collector outputs.
Tibbo
Form: M1S Power: 5V - Consumes 20mA Mates with: #19, #20, #21 Details This Tibbit is based on the PIC16F1824 microcontroller and takes advantage of the PWM channels available on this PIC device. The...
TIB-16
Two 24V NPN isolated open collector outputs
Tibbo
Form: M1S Power: 5V - Consumes 20mA Mates with: #19, #20, #21 Details Output transistors are rated for 24V/0.5A. To activate a transistor, set the corresponding control line LOW. When left...
TIB-58
Two 24V PNP isolated open collector outputs
Tibbo
Form: M1S Power: 5V - Consumes 20mA Mates with: #19, #20, #21 Details Output transistors are rated for 24V/0.5A. To activate a transistor, set the corresponding control line LOW. When left...
TIB-59