Tibbo

Form: M1S Power: 5V - Consumes 30mA Mates with: #19, #20, #21 Details If no external resistor is added these inputs activate at about 2V. Forward current should not exceed 10mA, and this caps the maximum input voltage at around 5V. Add external resistors...

Form: M1S Power: 5V - Consumes 60mA Mates with: #19, #20, #21 Details These relays are rated for 1A/30V. To activate a relay, set the corresponding control line LOW. When left unconnected, control lines default to HIGH (and, hence, relays are off)...

Form: M1S Power: 5V - Consumes 60mA Mates with: #19, #20, #21 Details These relays are rated for 1A/30V. To activate a relay, set the corresponding control line LOW. When left unconnected, control lines default to HIGH (and, hence, relays are off)...

Form: M2S Power: 5V - Consumes 40mA Mates with: #19, #20 Details This is a "full" serial port that can be electronically programmed to work in RS232, RS422, or RS485 mode. The Tibbit is based on the Sipex SP337 universal transceiver. Mode selection is...

Form: M1S Power: 5V - Consumes 20mA Mates with: #19, #20, #21 Details This is a standard "simple" RS232 port. This Tibbit is based on a generic RS232 transceiver (we use Zywyn ZT232F). For "normal" RS232 applications, this Tibbit has to be connected to...

Form: M1S Power: 5V - Consumes 20mA Mates with: #19, #20, #21, #28, #29, #30, #35, #36, #38, #39_1, #39_2, #39_3, #39_4, #41 Details As with Tibbits #00-1 and #00-2, this one "gets the CPU lines out". The only difference is that one of the lines is...

Form: M1S Power: 5V - Consumes 20mA Mates with: #19, #20, #21 Details As with Tibbit #00-1, this device allows you to work with CPU lines directly. The only difference is that one of the lines is replaced by the ground (GND) line. The GND line may be...

Form: M1S Power: 5V - Consumes 20mA Mates with: #20, #21 Details Sometimes you just want to work with CPU I/O lines directly — no logic or circuitry in between. This Tibbit is (basically) four wires that connect its control lines to I/O lines...

Industrial controller interface module to connect WinCOM Plus to FERMAX 2405 central unit.